3.Machining and processing HPL
The adhesive always has to be spread evenly across the surface. It has to be ensured for composite panels that the amount of adhesive applied is the same on both sides in order to avoid warping. This is particularly important for water-based adhesive systems. In this case the amount of adhesive applied should therefore be kept as small as possible in this case. Adhesive can be applied by hand using a notched trowel or a hand roller, or automatically using glue application machines. Four-roller machines ensure especially uniform adhesive application and accurate dosing.
Cold presses: Screw presses, single or multi-opening presses.
Hot presses: Single or multi-opening presses, short cycle presses, roller presses, double belt presses.
