Use a guide or stop bar to obtain straight cuts with a hand-held circular saw. Cutting has to be carried out face-down to avoid chipping on the visible edge. Please note the blade projection for portable circular saws with plunge function.
1 Clean cut with approx. 3–5 mm projection
2 Cut with tears with > 5 mm projection
Jig saws are only suitable with the correct saw blades and reworking of the edge. Cutting has to be carried out face-down to avoid chipping on the visible edge. A clean base (e. g. felt base) should be used to protect the visible decorative side from scratching.
